Model LPDP-20-1300 20 - 1300 MHz. 7 dBi Gain 
 

DUAL POLARIZED LOG PERIODIC ANTENNA

Design Features : The LPDP-20-1300 dual polarized log periodic antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy. The LPDP-20-1300 dual polarized log periodic antenna is designed to provide wideband directional transmission/reception of horizontal and vertical radio signals from 20-1300 MHz bands. The extra spacers are used between the support booms to improve mechanical durability of antenna. The specially designed mounting arrangement results in fast installation. This dual polarized log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, scanning and jamming applications due to its capability of receiving/transmitting both the E & H polarized signals simultaneously. This high gain cross elements LP antenna provides greater than 7 dBi gain over the 95% of the 20-1300 MHz band as the LPDA does not use loading technique to reduce the overall size of array.

Constructions : The LPDP-20-1300 assembled log periodic antennas outer-most dimensions are 6 meters (20 feet) long and 7.5 meters (24.5 feet) width & height. The antenna has foldable elements, the longest of which is 3.75 meters. All elements are supplied in two segments for easy of shipping and handling. The complete antenna can be assembled within 10 minutes by two operators with simple hand tools. The elements are attached via a fast deployment self-locking device at points along the boom. The antenna is also supplied with powder coating finish to protect the antenna further from severe environmental conditions. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of log periodic dipole antenna are made of type 316 marine grade stainless steel.

Electrical Specifications:
Frequency Range20 - 1300 MHz.
Gain7 dBi
BandwidthEntire Band
PolarizationVertical & Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points120 +/- 20 Degrees
Front to Back Ratio14 +/- 3 dB.
VSWR3:1
RF Power Handling Capacity250 Watts
Input Termination2 x N-Female
Lightning ProtectionDC ground

Mechanical Specifications:
Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating160 Km/Hr.
Overall Length6 Meters
Shipping Length3 Meters
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Tube
Insulator MaterialTeflon & Nylon
Maximum Mount Pipe Diameter 50-76 mm (2-3 Inches)
Gross Weight85 Kgs.

Environmental Specifications:
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)40 to + 80 Degrees Celsius
Humidity0 to 95% RH