Click here to visit the Home Page of Antenna Experts
Click here to visit the Home Page of Antenna Experts
 
 Model LPHP-500-2500 500-2500 MHz. 9 dBi Gain 
 

HIGH GAIN LOG PERIODIC ANTENNA

Design Features: The LPHP-500-2500 high power log periodic dipole antenna log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy is designed to provide wideband directional radio signals from 500 to 2500 MHz frequency band. The extra spacers are used between the support booms to improve mechanical durability of antenna. The mounting bracket is welded at the back end of the dual booms of log periodic antenna which permits to change the polarization from horizontal to vertical and vice-versa. This high power log periodic dipole antenna system is particular suitable for transmission, reception or monitoring and jamming application due to its broadband design feature and small size. This log periodic antenna provides strong performance over the entire band. Log periodic antenna does not use loading technique to reduce the overall size of array.

Constructions: The high power log periodic dipole antenna is supplied complete in assembled condition. The LP-500-2500 assembled log periodic antennas outer-most dimensions are 0.66 meter (26 Inches) long and 0.37 meter (14.5 Inches) wide The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. The coaxial cable sealed inside the support boom to make it weatherproof. All the screws, nuts and bolts of log periodic dipole antenna are made of marine grade stainless steel. Powder coating of the complete log periodic antenna provides extra protection against corrosion in saline weather present in coastal areas. The antenna is supplied with radome/housing made of high strength fiber glass for complete weather proofing.

Electrical Specifications:
Frequency Range500-2500 MHz.
Gain9 dBi
BandwidthEntire Band
PolarizationHorizontal or Vertical
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points65 +/-5 Degrees
Front to Back Ratio18 +/-2dB.
VSWR - Equal To or Better Then1:2.5
RF Power Handling Capacity650 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length660 mm
Shipping Length750 mm
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Auminum
Round Rod
Mounting Clamps PositionAt the back end of the boom
Maximum Mount Pipe Diameter 51 mm (2 Inches)
Gross Weight3 Kgs.

Environmental Specifications:
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH