Click here to visit the Home Page of Antenna Experts
Click here to visit the Home Page of Antenna Experts
 
 Model HFCM-6-30 6-30 MHz 5 dBi. Gain 
 

HF BROADBAND DIPOLE ANTENNA

HF Broadband Vertical Conical Monopole Omnidirectional Antenna, 6-30MHz, 5dBi Gain

The HFCM-6-30 conical monopole antenna is an excellent choice for omnidirectional HF communications where both ground wave and sky wave coverage are required. The electrical performance of HFCM-6-30 HF conical monopole antenna is nearly similar to the theoretical performance. Due to its large diameter/height ratio the HF vertical conical monopole has excellent VSWR and pattern performance over a very wide frequency range, as compared to other conical monopoles manufacturers. HF vertical conical monopole antenna operates at full efficiency over the 6-30 MHz bands.

The true wideband capabilities of the HF conical monopole are achieved with full radiation efficiency. The HFCM-6-30 HF conical monopole antenna uses no tuners, no special coupling units, no terminations, no resistors to achieve its high bandwidth, nor does these uses any techniques or devices to couple RF energy to the ground, an approach sometimes used to increase bandwidth. The HFCM- HF vertical conical monopole is the simplest and safest antennas to erect in its class. The structure of HF conical monopoles above 10 MHz is fully stable during the rigging sequence, with guys. Once erected, the HFCM-6-30 HF monopoles antennas have outstanding structural rigidity, troublesome deflections and mechanical oscillations do not occur.

All HFCM-6-30 HF conical monopole antenna uses high quality, exhaustively tested components and materials. All radiators are of Alumoweld, a wire composed of a high-strength steel core and a highly conductive, corrosion-resistant coating of aluminum. All insulators are made of high-strength DELRIN, a material with an extremely low loss tangent that is virtually impervious to the effects of UV and salt spray. All nuts, bolts, split washers and fasteners are made of marine grade stainless steel. Dissimilar metal contacts are avoided to the extent possible, and where they are used, measures are taken to prevent corrosion.

A working life of 20 years or more is standard with the HFCM series HF vertical conical monopole antennas. All the HF conical monopoles antennas are supplied in kit form dismantle condition with all required materials including the mast, guys, curtain, ground screen (earth mat) and foundation hardware.

Electrical Specifications:
Frequency Range6-30 MHz
Gain5 dBi.
Bandwidth6-30MHz
Antenna TypeConical
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmnidirectional
VSWR - Equal To or Better Then3:1
RF Power Handling Capacity1 KW with N-F, 10KW with 1-5/8” EIA
Input TerminationN-Female or DIN-Female or 1-5/8” EIA

Mechanical Specifications:
Antenna MaterialsAluminum & Stainless Steel
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length10 Meters
Shipping Length3.0 Meters
Radiating MaterialUltra Corrosion Resistant Stainless Steel
Gross Weight75 Kgs

Environmental Specifications:
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH