Model LP-800-2000 800-2000 MHz 9 dBi. Gain 
 

LOG PERIODIC ANTENNA

Design Features: The LP-800-2000 log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminium alloy with welded elements. The complete antenna is supplied with powder coating finish to protect it further from severe environment conditions. The LP-800-2000 log periodic dipole antenna is designed to provide wideband directional transmission/reception of radio signals from 800 to 2000MHz bands. The extra spacers are used between the support booms to improve mechanical durability of antenna. This high gain LPA provides strong performance over the entire frequency of 800-2000MHz as the LPDA does not use loading technique to reduce the overall size of array. Powder coating of the complete log periodic antenna provides extra protection against corrosion in saline weather present in coastal areas.

Constructions : The log periodic dipole antenna is supplied complete in assembled condition. The LP-800-2000 assembled log periodic antennas outer-most dimensions are 0.4 meter (16 Inches) long and 0.19 meter (7.5 Inches) wide. The compact size of the log periodic antenna allows easy handling and specially designed mounting arrangement results in fast installation. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and for immunity to noise. Output of log periodic antenna is provided via low loss coaxial cable at the back end of the antenna boom. All the screws, nuts and bolts of log periodic dipole antenna are made of stainless steel. The antenna can be supplied with radome/housing (optionally).

Electrical Specifications:
Frequency Range800-2000 MHz
Gain9 dBi.
BandwidthEntire Band
PolarizationVertical or Horizontal
Input Impedance50 Ohms.
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points60 Degrees
Front to Back Ratio18 dB.
VSWR2.5:1
RF Power Handling Capacity250 watts.
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
MaterialsAll Aluminum
Mounting Hardware -MaterialsStainless Steel
Wind Rating220 Km/Hr.
Mounting TypeEnd Mount
Overall Length400 mm
Shipping Length450 mm
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Tube
Insulator MaterialNylon & Teflon
Maximum Mount Pipe Diameter 51 mm (2 inches)
Gross Weight1.5 Kgs

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH