Model: LPDP-80-1300 80 - 1300 MHz. 8 dBi. Gain 
 

DUAL POLARIZED LOG PERIODIC ANTENNA

Design Features : The LPDP-80-1300 dual polarized log periodic antenna is designed to provide wideband directional transmission/reception of horizontal and vertical radio signals from 80-1300 MHz bands. The extra spacers are used between the support booms to improve mechanical durability of antenna. The specially designed mounting arrangement results in fast installation. This dual polarized log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, scanning and jamming applications due to its capability of receiving/transmitting both the E & H polarized signals. This high gain LP provides strong performance over the entire frequency of 80-1300 MHz as the LPDA does not use loading technique to reduce the overall size of array.

Constructions : The LPDP-80-1300 assembled log periodic antennas outer-most dimensions are 2.2 meters (7.2 feet) long and 1.9 meters (6.1 feet) width & height. The antenna has foldable elements, the longest of which is 0.95 meters. All elements are supplied in two segments for easy of shipping and handling. The elements are attached via a fast deployment self-locking device at points along the boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of log periodic dipole antenna are made of stainless steel.

Electrical Specifications:
Frequency Range80 - 1300 MHz.
Gain8 dBi.
BandwidthEntire Band
PolarizationDual (Vertical & Horizontal)
Input Impedance50 Ohms
Beamwidth -3dB.80 +/-10 Degrees (Horizontal)
Front to Back Ratio16 +/-2 dB.
VSWR1:2.5
RF Power Handling Capacity250 Watts
Input Termination2 x N-Female
Lightning ProtectionDC Ground

Mechanical Specifications:
MaterialsAll Aluminum
Mounting Hardware -MaterialsStainless Steel
Wind Rating190 Km/Hr.
Overall Length2.2 Meters
Shipping Length2.3 Meters
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Tube
Insulator MaterialTeflon & Nylon
Maximum Mount Pipe Diameter 52mm (2 Inches)
Gross Weight15 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH