Model: LP-30-1300 30-1300 MHz 9 dBi Gain 
 

MILITARY LOG PERIODIC DIPOLE ANTENNA

Design Features: The LP-30-1300 log periodic dipole antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 30-1300 MHz bands without having the requirement of multiple antennas. The complete log periodic antenna is supplied with powder coating finish to protect it further from severe environmental conditions. The extra spacers are used between the support booms to improve mechanical durability of log periodic antenna. The specially designed mounting arrangement results in fast installation. The LP antenna can be assembled in less than 10 minutes. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, scanning and jamming applications due to its broad band design feature, and small size. This log periodic antenna provides strong performance over the entire 30-1300 MHz band. Log periodic antenna does not use loading technique to reduce the overall size of array.

Constructions: The LP-30-1300 assembled log periodic antennas outer-most dimensions are 5.2 meters (17 feet) long and 5 meters (16.5 feet) wide. The antenna has removable elements, the longest of which is 2.5 meters. All elements are supplied in two segments for easy of shipping and handling. The elements are attached via stainless steel nuts & bolts systems at points along the boom. The tactical log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of tactical log periodic dipole antenna are made of type 316 marine grade stainless steel. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa.

Electrical Specifications:
Frequency Range30-1300 MHz
Gain9 dBi
BandwidthEntire Band
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points90 +/-10 Degrees
Front to Back Ratio16 +/-2 dB..
VSWR<1:3.0
RF Power Handling Capacity1000 watts
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
MaterialsAll Aluminum
Mounting Hardware -MaterialsStainless Steel
Wind Rating180 KMPH
Overall Length5.2 Meters
Shipping Length2.7 Meters
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Tube
Maximum Mount Pipe Diameter 50-102mm (2 Inches)
Gross Weight30 Kgs.

Environmental Specifications:
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)40 to + 80 Degrees Celsius
Humidity0 to 95% RH