Model: LP-88-1100 88-1100 MHz 9 dBi Gain 
 

MILITARY LOG PERIODIC DIPOLE ANTENNA

Design Features:The LP-88-1100 log periodic dipole antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 88-1100 MHz bands. The specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, surveillance, scanning and jamming applications due to its broad band design feature. This high gain LPA provides strong performance over the entire frequency of 88-1100 MHz as the LPDA does not use loading technique to reduce the overall size of array. Powder coating of the complete log periodic antenna provides extra protection against corrosion in saline weather present in coastal areas.

Constructions: The LP-88-1100 assembled log periodic antennas outer-most dimensions are 2.2 meters (7.2 feet) long and 1.7 meters (5.6 feet) wide. The antenna has removable elements, the longest of which is 0.85 meter. All elements are supplied in two segments for easy of shipping and handling. The elements are attached via a fast deployment stainless steel studs & nuts system at points along the boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of log periodic dipole antenna are made of type 316 grade marine grade stainless steel. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa.

Electrical Specifications:
Frequency Range88-1100 MHz
Gain9 dBi
BandwidthEntire Band
Horizontal Beamwidth -Half Power Points65 Degrees
Front to Back Ratio16 dB.
VSWR<1:2.5
RF Power Handling Capacity250 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
MaterialsAluminum
Mounting Hardware -MaterialsStainless Steel
Wind Rating190 KMPH
Overall Length2.2 Meters
Shipping Length2.3 Meters
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Rod
Insulator MaterialTeflon & Delrin
Maximum Mount Pipe Diameter 51MM (2 Inches)
Gross Weight7 Kgs.

Environmental Specifications:
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)40 to + 80 Degrees Celsius
Humidity0 to 95% RH