Model: DME-960-1240-9 960-1240 MHz 9 dBi Gain 
 

HIGH GAIN DME ANTENNA

Design Features: DME-960-1240-9 antenna is rugged all weather model uses 6063T6 ultra corrosion resistant architectural aluminum alloy and does not require any field tuning or adjustments. The DME-960-1240-9 is an Omni-directional broadband, higher performance, collinear dipole type phased array designed specifically for use as a distance measuring equipments (DME) antenna. All junctions are fully welded to prevent RF inter-modulation and antenna is completely protected within a high-tech ruggedized fiber glass radome to ensure survivability in the worst environments. The design of antenna allows controlling friction induced static, which could be created by wind and dust. The compact size of fiber glass collinear antenna allows easy handling and shipping.

Constructions: The DME-960-1240-9 is a center fed design which eliminates the distortion of the radiation pattern and ensures a true omni-directional horizontal pattern. The special stub matching is used for smooth VSWR and constant gain over the entire frequency band. This DME antenna consist of large diameter brass radiating elements stacked vertically, fed in phase and enclosed in fiber glass tube. The antenna termination is enclosed at bottom of the antenna for complete weather protection. The high gain DME antenna is strong enough to withstand an ice storm, and will also do well in a shoreline environmental conditions. The marine grade stainless steel mounting hardware is supplied with the antenna.

Coupler & Monitoring Probes: A coupler and two monitoring probes for monitoring the radio signal radiated by the antenna are supplied with the antenna. Probe output level is 25 dB ± 1 dB below power level applied to main RF input connector. The coupler is suitable to mount on the same mast near the antenna.

Electrical Specifications:
Frequency Range960-1240 MHz
Gain9 dBi
Bandwidth960-1240MHz.
Antenna TypeOmni
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
Beamwidth -3dB.10 Degrees (Vertical)
VSWR2:1
RF Power Handling Capacity150 Watts
Input TerminationN-Female

Mechanical Specifications:
MaterialsAluminum, Brass & Fiberglass
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr
Overall Length2.4 Mteres
Shipping Length2.5 Meters
Support Pipe Material6063T6 Aluminum Alloy
Maximum Mount Pipe Diameter 52 mm ( 2 Inches)
Radome MaterialFiber Glass
Radome Outer Diameter45 mm
Gross Weight5 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH