Model: AY-312-16 225-400 MHz 16 dBi Gain 
 

HIGH GAIN AVIATION BAND ANTENNA

Design Features: This UHF air band extended range antenna systems is highly suitable as base station antenna for ATC sites where extended range is required to cover the longer and deep Oceanic Information Region (OIC) to control the inbound and outbound Oceanic traffic. The UHF aeronautical band array systems has a 110 Degrees wide horizontal beam-width if configured vertically as shown in the figure. The unique design of the yagi antenna feed which works as matching device to keep the VSWR low resulting in increased efficiency of the UHF airo band yagi antenna. The UHF aviation band 8 stacked yagi antenna is supplied with N-Female termination fixed on the driven element. This highly directional antenna systems, comes factory tuned and does not require any field adjustment.

Constructions: The UHF aviation band array systems is consisting of 8 yagi antenna each having 3 elements, supplied with Two solid air-cored 4 way power splitter/combiner, One solid air-cored 2 way power splitter/combiner and Ten low loss phasing harness cables. Radiating elements, supporting booms and adjoining metal castings of UHF air band yagi antenna system have been constructed in high quality aluminum alloys to prevent corrosion. The UHF ATC yagi antenna system when packed comes with elements removed from the antenna boom for ease of packing and transportation. This array can be assembled at site with simple hand-tools. The complete UHF aviation band array system is constructed from 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and supplied with powder coating finish to protect it further from sever environmental conditions.

Electrical Specifications:
Frequency Range225-400 MHz
Gain16 dBi
Bandwidth20 MHz
Antenna TypeYagi
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points110 Degrees
Front to Back Ratio24 dB.
VSWR1.5:1
RF Power Handling Capacity1000 Watts
Input TerminationN-Female or DIN-Female

Mechanical Specifications:
Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Support Boom -
Material - O.D.
Aluminum
Square Tube - 25mm
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Tube - 19mm
No. of Yagi Boom8 Nos.
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Gross Weight30 Kgs.

Environmental Specifications:
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH