Model: AP-240030 2300-2600 MHz 30 dBi. Gain 
 

GRID PARABOLIC ANTENNA

Design Features: The AP-240030 grid parabolic antenna consists of full Parabolic reflector having a diameter of 1.8 Meters for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of grid parabolic antenna are of stainless steel.

Tracking Mechanism: The AP-240030 grid parabolic antenna is supplied with azimuth and elevation tracking mechanism where the fine adjustments is necessary to optimized the signal strength of a radio.

Electrical Specifications:
Frequency Range2300-2600 MHz
Gain30 dBi.
Bandwidth200 MHz.
PolarizationVertical or Horizontal
Input Impedance50 Ohms.
Radiation PatternDirectional
Beamwidth -3dB.4.5 Degrees
Front to Back Ratio30 dB.
VSWR1.3 : 1
RF Power Handling Capacity250 watts.
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
MaterialsAll Aluminum
Mounting Hardware -MaterialsStainless Steel
Wind Rating200 Km/Hr.
Support Pipe O.D.38 mm (1.5 Inches)
Support Pipe MaterialAluminum
Diameter of Parabolic Reflector1.8 Meters
Radiating MaterialBrass
Grid Members MaterialAluminum Tube - 1/2 Inch
Maximum Mount Pipe Diameter 115 mm ( 4 Inches.)
Gross Weight36 Kgs.

Environmental Specifications:
Operating Temperature(-)30 to +70 Degrees Celcius
Storage Temperature(-)40 to +80 Degrees Celcius
Humidity0 to 95% RH