Model: DME-960-1240-6 960-1240 MHz 6dBi Gain 
 

HIGH GAIN DME ANTENNA

Design Features: DME-960-1240-6 antenna is rugged all weather model uses 6063T6 ultra corrosion resistant architectural aluminum alloy and does not require any field tuning or adjustments. No ground plane is required to operate this antenna. The DME-960-1240-6 is an Omni-directional broadband, higher performance, collinear dipole type phased array designed specifically for use as a distance measuring equipments (DME) antenna. All junctions are fully welded to prevent RF inter-modulation and antenna is completely protected within a high-tech ruggedized fiber glass radome to ensure survivability in the worst environments. The design of antenna allows controlling friction induced static, which could be created by wind and dust. The compact size of fiber glass collinear antenna allows easy handling and shipping.

Constructions: The DME-960-1240-6 is a center fed design which eliminates the distortion of the radiation pattern and ensures a true omni-directional horizontal pattern. The special stub matching is used for smooth VSWR and constant gain over the entire frequency band. This DME antenna consist of large diameter brass radiating elements stacked vertically, fed in phase and enclosed in fiber glass tube. The antenna termination is enclosed at bottom of the antenna for complete weather protection. The high gain DME antenna is strong enough to withstand an ice storm, and will also do well in a shoreline environmental conditions. The marine grade stainless steel mounting hardware is supplied with the antenna.

Coupler & Monitoring Probes: A coupler and two monitoring probes for monitoring the radio signal radiated by the antenna are supplied with the antenna. Probe output level is -25 dB ± 1 dB below power level applied to main RF input connector. The coupler is suitable to mount on the same mast near the antenna.

Electrical Specifications:
Frequency Range960-1240 MHz
Gain6dBi
Bandwidth960-1240 MHz
Antenna TypeOmni
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
Beamwidth -3dB.20 Degrees (Vertical)
VSWR2:1
RF Power Handling Capacity150 Watts
Input TerminationN-Female

Mechanical Specifications:
Materials6063T6 Auminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length0.9 Meter
Shipping Length1 Meter
Support Pipe O.D.52 mm
Support Pipe MaterialAluminum Alloy
Radiating MaterialHigh Quality Brass
Radome MaterialFiber Glass
Radome Outer Diameter45 mm
Gross Weight4 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH