Model: ADS-B-1090-9 1090MHz 9 dBi Gain 
 

HIGH GAIN DME ANTENNA

Design Features: ADS-B-1090-9 Fiberglass Omni-directional Collinear Antenna is rugged all weather model uses high class brass and 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and does not require any field tuning or adjustments. No ground plane is required to operate this antenna. The ADS-B-1090-9 antenna is an Omni-directional narrowband, higher performance, collinear dipole type phased array designed specifically for use as a ADS-B ground station antenna. All junctions are fully welded to prevent RF inter-modulation and antenna is completely protected within a high-tech ruggedized fiber glass radome to ensure survivability in the worst environments. The design of antenna allows controlling friction induced static, which could be created by wind and dust. The compact size of fiber glass collinear antenna allows easy handling and shipping.

Constructions: The ADS-B-1090-9 antenna is a center fed design which eliminates the distortion of the radiation pattern and ensures a true omni-directional horizontal pattern. The special stub matching is used for smooth VSWR and constant gain over the specified frequency band. The bandwidth of the ADS-B antenna is fairly narrow, which can help to eliminate inter-modulation problems from adjacent strong signals in urban areas. The ADS-B collinear antenna consist of large diameter brass radiating elements stacked vertically, fed in phase and enclosed in fiber glass tube. The antenna termination is enclosed at bottom of the antenna for complete weather protection. ADS-B antenna is strong enough to withstand an ice storm, and will also do well in a shoreline environmental conditions. The marine grade type 316 stainless steel mounting hardware is supplied with the antenna.

Electrical Specifications:
Frequency Range1090MHz
Gain9 dBi
Bandwidth+/-10 MHz
Antenna TypeOmni
PolarizationVertical
Input Impedance50 Ohms
Radiation PatternOmni-directional
Beamwidth -3dB.10 Degrees (Vertical)
VSWR1.5:1
RF Power Handling Capacity200 Watts
Input TerminationN-Female

Mechanical Specifications:
Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length2.4 Meters
Shipping Length2.5 Meters
Support Pipe O.D.52 mm
Support Pipe MaterialAluminum Alloy
Radiating MaterialHigh Quality Brass
Gross Weight4 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH