Model: LP-130-190 130 - 190 MHz 9 dBi Gain 
 

HIGH GAIN LOG PERIODIC ANTENNA

DESIGN FEATURES: The LP-130-190 high gain VHF band log periodic dipole antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 130-190 MHz bands for base station sites for ground-to-ground and ground-to-air communication without having the requirement of multiple antennas. The complete log periodic antenna is supplied with olive green epoxy based powder coating finish to protect it further from severe environmental conditions. The extra spacers are used between the support booms to improve mechanical durability of log periodic antenna. The specially designed mounting arrangement results in fast installation. The LP antenna can be assembled in less than 5 minutes. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, scanning and jamming applications due to its broad band design feature, and small size. This log periodic antenna provides strong performance over the entire 130-190 MHz VHF band. Log periodic antenna does not use loading technique to reduce the overall size of array. The shipping length of antenna is less than 1.6meters making it highly suitable for mobile and tactical applications.

CONSTRUCTIONS: The high gain LP-130-190 assembled log periodic antennas outer-most dimensions are 1.5 meters (5 feet) long and 1.2 meters (4 feet) wide. The antenna has removable elements, the longest of which is 0.57 meter, making it highly suitable for easy of shipping/carrying/transportation and handling. All elements are supplied in two segments for easy of shipping and handling. The elements are attached via stainless steel nuts & bolts systems at points along the boom. The tactical log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of high gain tactical log periodic dipole antenna are made of type 316 marine grade stainless steel. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa. The antenna is supplied with standard Olive Green Military Color finish. The mounting hardware/bracket/latch is permanently fixed/welded at the rear/back end of the high gain log periodic dipole antenna

Electrical Specifications:
Frequency Range130 - 190 MHz
Gain9 dBi
Bandwidth130-190MHz
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points60 Degrees
Front to Back Ratio16 dB
VSWR2:1
RF Power Handling Capacity2.5 KW CW
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsStainless Steel
Wind Rating200 Km/Hr.
Overall Length1500 mm
Shipping Length1600 mm
Support Boom -
Material - O.D.
Aluminum-Square Tube
25.4mm (1 Inch)
Elements - Materials
- Cross Section - Outer Diameter
Aluminum-Round Tube
12.7mm (1/2 Inch)
Insulator MaterialTeflon & Delrin
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Gross Weight8 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +60 Degrees Celsius
Storage Temperature(-) 40 to +70 Degrees Celsius
Humidity0 to 95% RH