Model: LPHP-700-2700 700-2700 MHz 9 dBi Gain 
 

HIGH POWER RCIED JAMMER ANTENNA

Design Features: The LPHP-700-2700 high power log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminium alloy with welded elements. The complete antenna is supplied with powder coating finish to protect it further from severe environment conditions. The LPHP-700-2700 log periodic dipole antenna is designed to provide wideband directional transmission/reception of radio signals from 700 to 2700MHz bands. The extra spacers are used between the support booms to improve mechanical durability of antenna. This high power high gain log periodic dipole antenna provides strong performance over the entire frequency of 700-2700MHz as the LPDA does not use loading technique to reduce the overall size of array. Powder coating of the complete log periodic antenna provides extra protection against corrosion in saline weather present in coastal areas.
Constructions: The high power log periodic dipole antenna is supplied complete in assembled condition. The LPHP-700-2700 assembled high power log periodic antennas outer-most dimensions are 450mm long and 250mm wide. The compact size of the log periodic antenna allows easy handling and specially designed mounting arrangement results in fast installation. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and for immunity to noise. Output of log periodic antenna is provided via low loss coaxial cable whose N-Female termination is fixed at the back end of the antenna mounting plate All the screws, nuts and bolts of log periodic dipole antenna are made of stainless steel.
Radome: All elements of LPHP-700-2700 high power log periodic antenna are fully welded to its support boom to prevent RF inter-modulation and antenna is completely protected within a high-tech ruggedized radome which is made of fiberglass to ensure survivability in the worst environments conditions The heavy duty fiberglass enclosure has excellent transparency for RF signals and enough strength to withstand more than specified wind loads. Tapered enclosure is used for low wind loading and for minimal effect of ice formation on the high power log periodic antenna operation as well as providing an aesthetically pleasing appearance. The antenna is supplied with olive green color finish. Other customized housing/radome color can also be supplied on request.

Electrical Specifications:
Frequency Range700-2700 MHz
Gain9 dBi
Bandwidth700-2700 MHz
PolarizationHorizontal or Vertical
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points65 Degrees
Front to Back Ratio17 +/-2dB.
VSWR2.5:1
RF Power Handling Capacity250 Watts @ 2700MHz
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsStainless Steel
Wind Rating200 Km/Hr.
Overall Length450 mm (18 Inches)
Shipping Length550 mm (22 Inches)
Support Boom -
Material - O.D.
Aluminum-Square Tube
25.4mm (1 Inch)
Elements - Materials
- Cross Section - Outer Diameter
Aluminum-Round Tube
12.7mm (1/2 Inch)
Insulator MaterialTeflon & Delrin
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Gross Weight3 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH