Model: LP-80-2000 80-2000 MHz 8 dBi. Gain 
 

MILITARY LOG PERIODIC DIPOLE ANTENNA

Design Features:The LP-80-2000 log periodic dipole antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 80-2000 MHz bands. The specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, surveillance, scanning and jamming applications due to its broad band design feature. This high gain LPA provides strong performance over the entire frequency of 80-2000 MHz as the LPDA does not use loading technique to reduce the overall size of array. The high gain log periodic antenna can be assembled in less than 5 minutes by 2 technicians. The antenna is design as per MIL-STD-810F.

Constructions: The LP-80-2000 assembled log periodic antennas outer-most dimensions are 2.2 meters (7.2 feet) long and 1.9 meters (6.2 feet) wide. The antenna has foldable elements, the longest of which is 0.95 meter. All the elements are supplied in two segments for easy of shipping and handling. The elements are attached via a stainless steel stud system which is fixed at each element end for attaching the same on the corresponding marked position on support boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. The complete antenna is supplied with epoxy based powder coating finish to protect it further from severe environmental conditions All the screws, nuts and bolts of high gain log periodic dipole antenna are made of type 316 marine grade stainless steel. The LP Antenna is supplied with olive green military colour finish. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa.

Electrical Specifications:
Frequency Range80-2000 MHz
Gain8 dBi.
Bandwidth80-2000MHz
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points90 +/-10 Degrees Typical
Front to Back Ratio16 +/-2 dB. Typical
VSWRBetter Than 2.5:1
RF Power Handling Capacity250 Watts (700Watts Optional)
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating190 Km/Hr.
Overall Length2.2 Meters (87 Inches)
Shipping Length2.3 Meters (90 Inches)
Support Boom -
Material - O.D.
6063T6 Aluminum Alloy
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
6063T6 Aluminum Alloy
Round Tube
Mounting Clamps PositionAt Center or Rear End
Maximum Mount Pipe Diameter 38-77 mm (1.5-3 Inches)
Gross Weight7 Kgs. Typical

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH