 |
|
||||||||||||
VEHICLE MOUNT ANTENNA
Design Features: The AVM -450 UHF vehicle mount antenna is all brass antenna uses base loading technique for smooth impedance matching. Air-cored base loading coil keeps the losses to minimum.
Constructions: This Whip Mobile Antenna comes with a 3.5 Meter long RG-58 Coaxial Cable with N-Male Connector. The customized length of cable and connector can be supplied on request.
Mounting: The AVM-450 vehicle mount antenna can be mounted either roof of the vehicle or on the side of vehilcle usuing the "L" type bracket, supplied with the antenna.
| Electrical Specifications: | |
| Frequency Range | 330 - 512 MHz. |
| Gain | 3 dBi. |
| Bandwidth | 20 MHz. |
| Polarization | Vertical |
| Input Impedance | 50 Ohms |
| Radiation Pattern | Omni-directional |
| Beamwidth -3dB. | 72 Degrees (vertical) |
| VSWR | 1.5 : 1 |
| RF Power Handling Capacity | 250 Watts |
| Input Termination | N-Male |
| Mechanical Specifications: | |
| Weight | 0.4 Kgs. |
| Wind Rating | 190 Km/Hr. |
| Whip Elements | Stainless Steel |
| Whip Dia | 3.3 mm |
| Coil Housing | Nylon |
| Base Dia | 33 mm |
| Base Material | Brass |
| Coaxial Cable | RG-58 |
| Cable Length | 3.5 Meters |
| Shipping Length | 0.2 Meter |
| Radiating Material | Stainlees Steel |
| Environmental Specifications: | |
| Operating Temperature | (-)30 to +70 Degrees Celcius |
| Storage Temperature | (-)40 to +80 Degrees Celcius |
| Humidity | 0 to 95% RH |