Model: LP-50-500 50 - 500 MHz. 9 dBi. Gain 
 

HIGH GAIN LOG PERIODIC ANTENNA

Design Features: The LP-50-500 log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 50-500 MHz bands. The specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. The specially designed mounting arrangement results in fast installation. The LP antenna can be assembled in less than 5 minutes. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, surveillance, scanning and jamming applications due to its broad band design feature. This high gain LPA provides strong performance over the entire frequency of 50-500 MHz as the LPDA does not use loading technique to reduce the overall size of array.

Constructions: The LP-50-500 assembled log periodic antennas outer-most dimensions are 2.8 meters (9.1 feet) long and 3 meters (10 feet) wide. The antenna has removable elements, the longest of which is 1.5 meters. All elements are supplied in two segments for easy of shipping and handling. The elements are attached via a fast deployment studs & nuts system at points along the boom. The complete log periodic antenna is supplied with powder coating finish to protect it further from severe environmental conditions. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of log periodic dipole antenna are made of type 316 marine grade stainless steel. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa.

Electrical Specifications:
Frequency Range 50 - 500 MHz.
Gain9 dBi.
BandwidthEntire Band
PolarizationVertical or Horizontal
Input Impedance50 Ohms.
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points70 Degrees
Front to Back Ratio16 dB.
VSWR1:2.5
RF Power Handling Capacity500 Watts.
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
Materials6063T6 Aluminum
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating195 Km/Hr.
Overall Length2.8 Meters
Shipping Length2.9 Meters
Support Boom -
Material - O.D.
Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Aluminum
Round Tube
Maximum Mount Pipe Diameter 51mm (2 Inches)
Gross Weight10 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH