Model AP-145030 1300-1600 MHz 30 dBi. Gain 


Design Features: The AP-145030 grid parabolic antenna consists of full Parabolic reflector having a diameter of 3 Meters for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of grid parabolic antenna are of stainless steel.

Tracking Mechanism: The AP-145030 grid parabolic antenna is supplied with azimuth and elevation tracking mechanism where the fine adjustments is necessary to optimized the signal strength of a radio link along with Two side struts to provide extra supports to the antenna.

Electrical Specifications:
Frequency Range1300-1600 MHz
Gain30 dBi.
Bandwidth150 MHz.
PolarizationVertical or Horizontal
Input Impedance50 Ohms.
Radiation PatternDirectional
Beamwidth -3dB.4.8 Degrees.
Front to Back Ratio38 dB.
RF Power Handling Capacity250 Watts.
Input TerminationN-Female.
Lightning ProtectionDirect Ground

Mechanical Specifications:
Mounting Hardware -MaterialsStainless Steel
Weight115 Kgs.
Wind Rating195 Km/Hr.
Support Pipe O.D.76 mm (3 Inch)
Support Pipe MaterialAluminum
Diameter of Parabolic Reflector3.0 Meters
Radiating MaterialBrass
Grid Members MaterialAluminum Tube - 5/8 Inch
Maximum Mount Pipe Diameter 115 mm (4.5 Inches)

Environmental Specifications:
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH