 |
|
||||||||||||
SATCOM GROUND STATION ANTENNA
Design Features The SAT-225-400C is single mode UHF SATCOM antenna which is ideal for SATCOM On-The-Move (SOTM) operation. The SATCOM antenna can be used for communicating with satellites low on the horizon. SAT-225-400C can be used with most tactical Multi-Band, Multi-Mode Receivers (MBMMR), as well as all airborne and ground transceivers that accept 50 ohm antenna impedance.
The Antenna is highly suitable for SATCOM – Satellite high angle coverage and low angle air-to-air or air-to-ground communications.
SAT-225-400C SATCOM antenna features of a single port high angle (RHCP) and low angle antenna system that is suitable for installation on vehicular, shipboard and ground shelter applications. No diplexer or switching is required.
| Electrical Specifications: | |
| Frequency Range | 225-400 MHz |
| Gain | 6 dBic |
| Bandwidth | 225-400MHz |
| Polarization | RHCP |
| Input Impedance | 50 Ohms |
| VSWR - Equal To or Better Then | 1:2.5 |
| RF Power Handling Capacity | 100 Watts |
| Input Termination | N-Female |
| Mechanical Specifications: | |
| Antenna Materials | 6063T6 Aluminum Alloy |
| Mounting Hardware -Materials | Marine Grade Stainless Steel |
| Wind Rating | 180 Km/Hr. |
| Overall Length | 600 mm |
| Gross Weight | 3.5 Kgs. |
| Environmental Specifications: | |
| Operating Temperature | (-) 30 to +70 Degrees Celsius |
| Storage Temperature | (-) 40 to +80 Degrees Celsius |
| Humidity | 0 to (% RH |