Click here to visit the Home Page of Antenna Experts
Click here to visit the Home Page of Antenna Experts
 
 Model APT-1327-4 1350-2700 MHz 21-27 dBi Gain 
 

TACTICAL RADIO RELAY ANTENNA

Design Features: The APT-1327-4 tactical microwave grid parabolic antenna consists of full Parabolic reflector having a diameter of 1.2 Meters (4 feet) for use in all tactical and fixed station applications for conventional radio relay systems. The antenna covers full NATO band III+ frequency band, operates in linear polarization and requires one operator only for installation. The antenna features a rare combination of high gain low side lobes and a rugged construction. APT-1327-4 is perfect for use in crowded electromagnetic spectrums which avoid interference from co-sited antenna. The mounting arrangement of Tactical Antenna permits to change the polarization from horizontal to vertical and vice-versa by mounting hardware fitted at rear end of the antenna.

Constructions:The APT-1327-4 tactical microwave antenna operates in the 1350-2700MHz. frequency band and can be installed at vertical erected mast. The parabolic reflector is illuminated by a primary feed horn which is fitted to the center of assembly with quick fastener system. Radiating elements and the dipole feed are made of high quality brass. All the screws, nuts and bolts of tactical microwave antenna are of stainless steel. The antenna supplied with army green color. The complete antenna is supplied with anti-corrosive powder coating finish and the dipole feed is completely sealed inside ABS housing/radome.

Electrical Specifications:
Frequency Range1350-2700 MHz
Gain21-27 dBi
BandwidthNATO Band III+
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Horizontal Beamwidth -Half Power Points13/9/6 Degrees
Front to Back Ratio30 dB.
VSWR - Equal To or Better Then2:1
RF Power Handling Capacity500 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Diameter of Parabolic Reflector1.2 Meters (4 feet)
Support & Rim MaterialAluminum 25.4mm (1") OD
Grid Members MaterialAluminum 12.7mm (1/2") OD
Maximum Mount Pipe Diameter 38-52mm (1.5-2
Radome MaterialABS
Radiating Elements - MaterialHigh Quality Brass
Gross Weight12 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH