Model WDHP-800-2000 800-2000 MHz 2 dBi. Gain 


Design Features: WDHP-800-2000 wide band high power heavy duty fully welded discone antenna is specially designed to survive the most extreme conditions, where conventional antennas often fail. Due to its low VSWR through entire band from 800-2000 MHz., this high power handling discone antenna can be used as a transmitting and receiving antenna with high efficiency, to meet the broadband requirement of a base station antenna such as spectrum monitoring or jamming application without need of multiple antennas. WDHP-800-2000 high power wideband discone antenna is extremely rugged, fully welded at all junctions, all weather model, does not require any field tuning or adjustments. The wide vertical beam-width of high power discone antennas allows clear communication for ground, sea, and ground-to-air applications. The fully welded wide band discone antenna is also highly suitable for Oceanic application especially in arctic region where vibration and ice loading are main concern.
Constructions: The fully welded high power wide band discone antenna uses 6063T6 Mil grade ultra corrosion resistant architectural anodized aluminum alloy with powder coating finish to protect the antenna further from severe environmental condition. All internal junctions are enclosed within a ruggedized ABS radome to ensure survivability in the worst environments. The powder coating on all metal surfaces ensures complete protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and sand storms in desert environments. The high power wide band discone antenna termination enclosed inside the mounting pipe for complete weather protection. All the screws, nuts and bolts of heavy duty wide band discone antenna are made of type 316 marine grade stainless steel.
Radome: All elements of high power wide band discone antenna are fully welded to its appropriate location to prevent RF inter-modulation and antenna is completely protected within a high-tech ruggedized radome which is made of ABS material to ensure survivability in the worst environments conditions The heavy duty ABS enclosure has excellent transparency for RF signals and enough strength to withstand more than specified wind loads. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the high power wide band antenna operation as well as providing an aesthetically pleasing appearance. The antenna is supplied with olive green MIL color finish. Other customized housing/radome color can also be supplied on request.

Electrical Specifications:
Frequency Range800-2000 MHz
Gain2 dBi.
Bandwidth800-2000 MHz
Antenna TypeOmni
Input Impedance50 Ohms
Radiation PatternOmni-directional
Beamwidth -3dB.78 Degrees (Vertical)
RF Power Handling Capacity500 Watts CW
Input TerminationN or DIN Female

Mechanical Specifications:
MaterialsAluminum, ABS & SS
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length200 mm
Shipping Length250 mm
Radiating Material6063T6 Aluminium Alloy
Insulator MaterialTEFLON
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Radome MaterialHigh Strength ABS
Gross Weight< 1.5 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH