Antenna Experts manufactures military grade air traffic controller antenna for civil aviation ATC band 117.975-137 MHz and military ATC air band 225-400 MHz with various gain for directional and omni-directional properties. Antenna Experts also manufactures extended range ATC air band array system to control the vertical and horizontal beamwidth in desired plane as per the customer specific requirements.
Antenna Experts have many years of experience in aviation band antenna field and are able to offer array systems to suit any type of requirements. Our AY and AQY series HIGH GAIN ATC aviation band array systems are highly suitable as base station antennas for ATC sites where extended communication range is required to cover the particular sector of Flight Information Region (FIR) like narrow but long strip with wider elevation beam-width or Oceanic Information Region (OIC) of a bay/gulf with wider azimuth beam-width to control the inbound and outbound Oceanic traffic.
Apart from the list appeared in the "Aviation Band Antenna" section of our website we are expertise to design and supply the ATC antenna systems with many configurations to control the beam-width in desired plane. The SD series VHF/UHF ATC aviation or aero band antennas are manufactured using high-grade anodized aluminum alloy. Powder coating of the complete aviation band dual dipole antenna provides extra protection against corrosion in saline weather present in coastal areas. The AC series aviation band antennas are light weight, quick deployable and broad bandwidth antennas which are specially designed to avoid the use of multiple antennas and supplied with bird resistant cap.
Both SD and AC series VHF/UHF ATC antennas features, wide bandwidth, high gain, high power handling capacity, low VSWR, low noise performance, high vertical bandwidth and null filling coverage with omni-directional characteristics.All aviation band antennas supplied with marine grade stainless steel mounting hardware
The AC series VHF UHF ATC antennas are consist of large diameter radiating elements stacked vertically and enclosed in ABS radome. The special “Choke and Spark Gap” technique is used for smooth VSWR and constant 3dBi. gain over the entire ATC 225-400 MHz. frequency band. The UV resistant ABS enclosure has excellent transparency for RF signals and enough strength to withstand specified wind loads. The stainless steel mounting hardware and bird resistant cap is supplied with the antenna.
Antenna Experts ground-to-air antenna systems are supplied worldwide for mission-critical communications systems where reliability is paramount. We supply to a diverse customer base including emergency services, aeronautical/aviation, military, Government, public transport, and utility service, demanding applications requiring the utmost reliability. Our extensive ATC ground to air antenna products range and engineering experience allow us to give our customers cost effective and dependable solutions, backed up by dedicated product support, our ATC antenna range is unparalleled in terms of quality, reliability and price.
Antenna Experts ground to air antennas are known for their streamlined aesthetics, great value, and for what really matters when youre looking for world highest performance ground-to-air antenna systems for 100% connectivity & reliability. Antenna Experts has manufactured VHF/UHF ground-to-air, ground-to-ground, and shipboard communications antennas for military and government clients.
Our ground-to-ground and ground-to-air ATC communication antennas include VHF UHF multi ports ATC collinear sealed in fiberglass radome, ATC stacked dipole array, ATC log periodic antennas, ATC discone antennas, ATC coaxial dipole antenna , ATC tactical and ATC yagi antennas for extended rage aeronautical band antenna systems to cover the particular sector of Flight Information Region (FIR) like narrow but long strip with wider elevation beam-width or Oceanic Information Region (OIC) of a bay/gulf with wider azimuth beam-width to control the inbound and outbound Oceanic traffic.
Antenna Experts ground-to-air antenna products has created a unique and comprehensive range of antennas and antenna arrays tailored specifically for civilian and military ground to air communications systems. Made to the highest standards, our ground-to-air products are unmatched in performance and reliability. Our ground to air antenna range include a comprehensive range of broadband multi-dipole antennas to cope with modern frequency-hopping transceivers, and high gain aviation band antenna systems for extended range VHF communications. Much ground to air antennas products carry NATO specification and offer high power handling to allow the use of multiple transmitters.
Antenna Experts ground-to-air multi-ports antennas are vertically polarized omni antennas designed for air traffic control and ground-to-air communications. These multiple dipole ground to air antennas have various configurations of arrays available, including custom designs VHF and UHF frequencies ranging from 108-156 MHz and 225-400 MHz. Antenna Experts Ground To Air antenna systems are designed for broad-band omni-directional ground-based communications with aircraft. It is extended for use with aeronautical band radio sets which communicate with VHF UHF command radio sets in aircraft and such ground VHF UHF stations in the terminal area.
Our Multi-ports ATC collinear array concept has been specifically developed for ground-air-ground, air traffic control and base communications applications. This omni-directional concept employs a unique method of shielding the feed cables to improve radiation pattern characteristics. The multi-ports ground to air antenna also has a high degree of isolation between discrete elements within a closely spaced array. The result is a small, rugged, easy to install ground to air ATC antenna. The lightweight and compact design minimizes space and lends itself to tactical transportable use in the most hostile environments.
Our multi-ports ATC band antennas designed for future combat systems program, it has been modified to match the needs of legacy programs while significantly reducing the number of antenna required. The multi port ATC antenna operates with legacy radios for SINCGARS and EPLRS through new multiband radios such as the Side Hat radio. Multiple frequency inputs can be used simultaneously in our ground to air multi-ports ATC antennas. The multi-ports termination feature decrease in the number of antennas required at any tower site also gives a much improved radiation pattern coverage. Our multi port high gain ATC omni antenna has a minimum of 28 dB isolation between any two antenna elements in every multi-ports ground to air antenna configurations.
Please visit our "Aviation Band Antenna" section of our website for more details on aviation antennas products datasheets and installation manual in pdf format. You can also request more information about ATC antenna like VSWR curve and radition patterns.